Ubiquiti UniFi XG Wireless Access Point - UAP-XG
Ubiquiti Networks UAP-XG
4 arriving 19-Nov-2021
Linitx Quick Code # 15404
Manufacturer SKU: UAP-XG
Manufacturer: Ubiquiti Networks
|Price||£620.00 EXC VAT||£613.80 EXC VAT||£607.60 EXC VAT||£598.30 EXC VAT||£589.00 EXC VAT||Call Us 01449 724255|
Ubiquiti UniFi XG Access Point - UAP-XG
The Ubiquiti UniFi XG Access Point - UAP-XG is the new flagship Unifi access point. Serving as many as 1500 client devices, it's perfect for high-density environments such as large offices, conference centres and even stadiums. The UAP-XG boasts an impressive 4x4 MU-MIMO quad-radio comprised of 3 client radios and 1 dedicated security radio that continuously scans the environment for persistent threat management.
Two 5GHz 802.11ac Wave 2 radios serve clients with up to 3.466 Gbps combined through-put whilst a single 2Ghz radio provides 800Mbps for older client devices as well as frequency diversity. The UAP-XG has two RJ45 ports, one 1Gbps and one 10Gbps, to move all that data. All those radios draw a lot of power so the UAP-XG utilises the new 802.3bt protocol that can provide up to 90W over 4 pairs.
MU-MIMO - Assuming the same conditions, a Wave 2 radio provides up to 75% improvement1 beyond a Wave 1 radio. This improvement increases wireless performance and/or serves more clients at the same performance level.
4x4 Spatial Streams - At any single time, a Wave 2 radio can communicate with the following MU-MIMO clients:
- four 1x1 clients
- two 2x2 clients
- one 2x2 client and two 1x1 clients
- one 3x3 client and one 1x1 client
Real-World Performance - Combining twice the number of 5 GHz radios and four times the associations per radio, the UniFi XG AP delivers an order of magnitude more performance than a typical 802.11ac Wave 1 AP.
Threat Management - The airView tool offers real-time visibility into your RF spectrum. Because it uses the dedicated security radio, it analyzes all of your available RF channels without affecting performance or disrupting client activity. The airTime tool visualises and analyses how the APs use channels in real time. The breakdown is by frame type, clients, neighboring APs, protocols, and interference.
10G and 1G Ethernet Connectivity - Designed to be a 10G Ethernet back-haul, the primary port carries both data and PoE, while the secondary Gigabit Ethernet port is for bridging and also supports PoE input.
Power over Ethernet (PoE) Standard - The UniFi XG AP can be powered by an 802.3bt PoE compliant switch.
- 10Gigabit Ethernet Support
- 4x4 MU-MIMO Quad-Radio: (3) client, 1 Security
- Dual 5 GHz 802.11ac Wave 2 Radios
- 3.466 Gbps Combined Radio Rate in 5 GHz
- 800 Mbps Radio Rate in 2.4 GHz
- Dedicated Security Radio with Persistent Threat Management
- 1,500 Client Association Limit
- 802.3bt Power Injector Included
|Dimensions||228 x 228 x 50 mm|
With Mounting Kits
|1.20 kg |
|Networking Interface||(1) 10/100/1000 Ethernet Port |
(1) 1/10 Gbps ICM Ethernet Port
|Power Method||802.3bt PoE|
|Supported Voltage Range||44 to 57VDC|
|Power Supply||PoE Injector 50VDC, 1.2A Gigabit|
|Maximum Power Consumption||31W|
|Radios||2.4 GHz, (2) 5 GHz, Security|
|Maximum TX Power |
(2) Dual-Port, Dual-Polarity Antennas, 6 dBi each
(2) Dual-Port, Dual-Polarity Antennas, 8 dBi each
|Wi-Fi Standards||802.11 a/b/g/n/ac/ac-wave2|
|Wireless Security||WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11 w/PMF|
|BSSID||Up to 8 per Radio|
|Mounting||Wall/Ceiling/Junction Box (Kits Included)|
|Operating Temperature||-10 to 60 C|
|Operating Humidity||5 to 95% Noncondensing|
|Certifications||CE, FCC, IC|