Tycon 5 Port 360W Gigabit BT PoE Switch - TP-SW5G-D-BT

Tycon TP-SW5G-D-BT

Tycon 5 Port 360W Gigabit BT PoE Switch - TP-SW5G-D-BT
Tycon 5 Port 360W Gigabit BT PoE Switch - TP-SW5G-D-BT Main Image
Tycon 5 Port 360W Gigabit BT PoE Switch - TP-SW5G-D-BT package contents
In Stock

5 available Shipping today cut off.

0 customer reviews:


- +

Availability: Despatched next working day

Linitx Quick Code # 16979 You can use the quick code in the search box

Manufacturer SKU: TP-SW5G-D-BT

Manufacturer: Tycon Systems

Price£259.99 EXC VAT£257.39 EXC VAT£254.79 EXC VAT£250.89 EXC VAT£246.99 EXC VATCall Us 01449 888000
window dressing ||||

Tycon Systems 5 Port 360W Gigabit 802.3bt PoE Switch - TP-SW5G-D-BT

The TP-SW5G-D-BT from Tycon Systems is a high speed, high power layer 2 network switch with one 802.3bt PoE input and 4 802.3af/at/bt PoE outputs, all of which feature 15kV surge protection and are conformal coated for moisture protection, that offer up to 90W of power per port by utilising 2 or 4 pair powering.

TP-SW5G-D-BT's port 5 (uplink) can accept up to 70W PoE in from an 802.3bt source on 4 pairs which can then power both the switch and any connected devices over CAT5 or higher Ethernet cable, with a Wire Terminal Connector (10A approx 500W max) offering an alternative power method. When two different inputs are in use for redundancy, the higher voltage that takes priority.


  • Mulitple Power Inputs: 802.3bt PoE to Port 5, Wire Terminal
  • Gigabit Compatible
  • Built-in Surge Protection
  • Automatic MDI/MDI-X Crossover
  • Automatic Speed and Duplex Sensing
  • Low Self Power and High Temperature Operation
  • DIN Rail Adapters included


Ports Port 1-4: 802.3bt 90W per port, supports 2 or 4 pair power
Port 5: UPLINK 802.3bt Compatible PoE Input to 70W
Transmission Speed 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
Data/PoE Connections Shielded RJ45, Grounded to FG connection
Input Voltage Vin 53VDC to 57VDC on Wire Terminal or 802.3bt PoE on port 5
44-57V OK if powering 802.3af devices
50-57V OK if powering 802.3at devices
Note: Input power (watts) must be higher than total PoE power out (watts)
LED Function Power on LED
Green = OK, Off = Fault
RJ45 LED’s
Port 1-5 Right Hand LED: Link Light (Blinking) (Green = Gigabit, Yellow = 100Mb)
Port 1-4 Left Hand LED: PoE ON 4 pair (Yellow On), PoE ON 2 pair (Yellow Blinking)
Port 5 Left Hand LED: PoE Power On (Yellow On)
PoE Protections Over Temperature, Over Current, Short Circuit
Surge Protection IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC61000-4-4 (EFT) 40A (5/50ns)
Self Consumption < 5 Watt Typical
Switch Technology Store and Forward, automatic MDI/MDI-X crossover
Protocol CSMA/CD
Flow Control IEEE802.3x(full-duplex), Back Pressure(half-duplex)
Data Transmission Rate 1488000pps , 148800pps, 14880pps ; Automatic speed and duplex sensing
Address Table 2K MAC, self-learning
Operating Temp -30 to +70°C
Operating Humidity 5% - 90%
Storage Temperature -40 to +85°C
Dimensions (L x W x H) 159 x 118 x 40mm
Weight 318g

Package Contents:

  • 1 x TP-SW5G-D-BT
There are no reviews for this product yet.

Please note that links to other websites are beyond our control. We link in good faith and are not be responsible for their content.

Tycon TP-SW5G-D-BT datasheet

LinITX Blog

Copyright © 2002-2024 Multithread Consultants Ltd.