Why Purchase from LinITX?
This AC Adapter is compatible with the 100W PSU Board and the 80W PSU Board that we stock. It's maximum output is 90W.Input - 100-240V~2.5A, 50-60HzOutput - 19V DC 4.75A - 90W Max2.5mm Centre Positive Barrell Connector9 In Stock
Less than 5 nanoseconds in response time. 10x the protection so it simply lasts longer. Ethernet "Lightning" Protection PoE Configuration: Passive (Positive or Negative power supply) PoE Data Pins: 1, 2, 3, 6 PoE Power Pins: 4, 5, 7, 8 Max. POE operating Voltage:...14 In Stock
This 12V 84W PSU from FSP is ideal for use with the range of picoPSU's that we stock and would also be a suitable replacement power supply for any mini-ITX case that requires a 12V DC Input. Features: High Efficiency Low Ripple& Noise Output Over Voltage...16 In Stock
MikroTik PW48V-12V85W Open Frame Power Supply The new PW48V-12V85W 48V DC open frame power supply from MikroTik offers a 12V 7A output for use with the new R2 revisions of their Cloud Core Router range. for -48V installations, simply remove one of the current power...5 In Stock
MikroTik 150W AC input with active PFC - UP1302C-12 The UP1302C-12 by MikroTik is an internal 12V 10.8A power supply for the R2 revisions of their CCR1036 series routers. Specifications: UP1302C-12 Input Voltage90-264V Input Frequency47-63Hz Input Current3.3Arms...10 In Stock
MikroTik 30-60W Open Frame AC to DC Converter - GB60A-S12. The GB60A-S12 by MikroTik is an internal 12V 5A internal power supply for the R2 revisions of their CCR1016 series routers. Specifications: GB60A-S12 Output Wattage60W Output Voltage12V Output Current5A...10 In Stock
This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices. Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is...82 In Stock
The MikroTik RBGESP is a Gigabit Ethernet Surge Protector that is suitable for use outdoors. Use the GESP to protect your network from lighting or surge damage. The RBGESP comes with a moulded outdoor enclosure and grounding cable. Specifications; RBGESP Interface...25 In Stock
The MikroTik Gigabit Passive Ethernet Repeater or RBGPeR unit allows you to extend the capability of a CAT6 Ethernet cable connection by an additional 100 to 150 m (depending on cable quality) to regular network devices. If you are connecting two GPeR units together,...28 In Stock
MikroTik are now offering a Hot Swap 48V DC telecom power supply, available separately for use with the CCR1072. Simply remove one of the current power supplies and replace it with the new PW48V-12V150W for 48V installations - simple and easy. You don't even need...8 In Stock
The new Mikrotik mUPS is a PoE injector featuring battery backup capability and equipped with a 12 V battery connector. While primarily functioning as a PoE injector, the mUPS can seamlessly switch over to any DC power source from 12-28V, making it incredibly flexible....76 In Stock
A Mikrotik 48V 2A 96W power supply, to be used with MikroTik products that support 48V PoE output, such as the hEX PoE and CRS112-8P-4S-IN. The 48V2A96W provides 30% more current than the older 48POW model (48 V 1.46 A 70 W), allowing more power per port for more current...4 In Stock More due, call us.
The MikroTik PowerBox Pro is an outdoor five Gigabit Ethernet port router with PoE output on four ports. The PowerBox Pro features a sleek outdoor enclosure, making it suitable for various types of installations such as radio towers. The PowerBox also supports passive...16 In Stock More due, call us.
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. Can...312 In Stock
Please note that this unit does not include a PSU The MikroTik GPEN11 is a wall-mountable passive PoE power injector, designed for WISPs to power CPE back-bone equipment. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace...36 In Stock
OPEN BOX - Please note, this unit does not come with its original product packaging, it will be packed in a suitable outer box for shipping. MikroTik are now offering a Hot Swap power supply, available separately, for use with the CCR1072. Should one of the existing...1 In Stock
Power over Ethernet is a simple way of providing power for an access point on the roof. Passive PoE uses free wires in the Ethernet cable and sends the equipment's power along them to the far end. Over a short distance, it's usually possible to use the power adapter...302 In Stock
Poe World Gigabit Splitter GAF-12v12w The GAF-12v12w Gigabit Splitter from PoE World provides a low cost solution for delivering power to a 12V camera or routers over up to 100m of network cable, allowing power to be carried on 10/100/1000 networks with either 802.3af...17 In Stock
PoE World PoE Extender This passive 10/100 PoE Extender from PoE World extends power and data 100 metres beyond the standard length on 10/100 network cables and is compatible with passive PoE switches and injectors with any CAT5e, CAT6 or CAT7 ethernet network cables....25 In Stock
PoE World PoE Detector The PoE Detector from PoE World is a device that indicates the type of PoE on a network cable using a set of 3 LED's. It can be used to detect Passive 24/48/56V, 802.3af, 802.3at and 802.3bt with 568A, 568B or PoE reverse polarity. Mode A and...26 In Stock