Ubiquiti FiberPoE Gen2 PoE Extender - F-POE-G2
Ubiquiti Networks F-POE-G2
|Price||£28.00 EXC VAT||£27.72 EXC VAT||£27.44 EXC VAT||£27.02 EXC VAT||£26.60 EXC VAT||Call Us 01449 724255|
Ubiquiti F-POE-G2 FiberPoE Gen2
The Ubiquiti FiberPoE Gen2 is a low-cost, easy to implement solution, that allows long-distance runs to a PoE device. Deployments with the FiberPoE also provide significant EMI and ESD protection over typical PoE installations.
Separate Data and Power Transport: PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs. The FiberPoE provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE device as an Fiber-to-Ethernet Converter, or a pair of FiberPoE devices to create a Fiber Bridge.
Fiber Optic Data Transport: Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable. The FiberPoE supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.
Integrated Fiber Cable Strain Relief- An integrated strain relief system was thoughtfully designed to fit inside the FiberPoE cover for added protection and a cleaner installation.
Enhanced Surge Protection Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal block and PoE port, the FiberPoE Gen 2 delivers enhanced surge protection. The added GDT support effectively protects against lightning and other power surges.
|Dimensions||196.4 x 93.5 x 32.4 mm|
|Interface Connections||(1) 1 Gbps SFP Port |
(1) DC Terminal Block
(1) DC RJ45 Port DC Injection
(1) 1000 Mbps Ethernet PoE Port
|Typical Power Consumption||1.5W|
|Power Method||DC Terminal Block, 2-Wire, 24VDC or 50VDC |
DC In RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) Passthrough
PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) PoE Passthrough
|PoE Output||PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC), or |
4-Pair (24VDC or 50VDC) PoE
|DC Output||Terminal Block, 2-Wire (24VDC or 50VDC)|
|Input DC Voltage||16 to 57V|
|Surge Protection||Built-In High-Current Gas Discharge Tube |
for DC Terminal Block and PoE Port
|LED||White: Power On |
Blue (Flashing): Activity
|Operating Temperature||-40 to 60C|
|Operating Humidity||10 to 95% Noncondensing|
|ESD/EMP Protection||+-24kV Contact / Air for Ethernet|
|Certifications||CE, FCC, IC|
- FiberPoE Gen 2
- Self-Tapping Screw
- Metal Straps (Qty. 2)