Ubiquiti UniFi Access G2 Starter Kit - UA-G2-SK

Ubiquiti UA-G2-SK

Ubiquiti UniFi Access G2 Starter Kit - UA-G2-SK
Ubiquiti UniFi Access G2 Starter Kit - UA-G2-SK Main Image
Ubiquiti UniFi Access G2 Starter Kit - UA-G2-SK rear of product
Ubiquiti UniFi Access G2 Starter Kit - UA-G2-SK front of product
Ubiquiti UniFi Access G2 Starter Kit - UA-G2-SK inside view
Ubiquiti UniFi Access G2 Starter Kit - UA-G2-SK product 
Ubiquiti UniFi Access G2 Starter Kit - UA-G2-SK package contents
In Stock

4 available Shipping today cut off.

0 customer reviews:


Choose from the following product options:

Extended Warranty  Extended warranty - covering hardware & software failure.

- +

Availability: Despatched next working day

Linitx Quick Code # 17673 You can use the quick code in the search box

Manufacturer SKU: UA-G2-SK

Manufacturer: Ubiquiti Inc

Price£230.99 EXC VAT£228.68 EXC VAT£226.37 EXC VAT£222.91 EXC VAT£219.44 EXC VATCall Us 01449 888000
window dressing ||||

Ubiquiti UniFi UA-G2-SK Access G2 Starter Kit

At a Glance:

  • 1 x UniFi Access Door Hub - intelligent, IP networked, single door controller
  • 1 x Access Reader G2 - premium NFC reader
  • 10 x UniFi Access Cards - secure NFC smart card
  • Door Hub is PoE++ powered
  • NFC reader is IP55 weatherproof
  • NFC cards operate at a frequency of 13.56 MHz

The Ubiquiti UniFi Access G2 Starter Kit (UA-G2-SK) provides a comprehensive solution for secure door access control.

UA-G2-SK Kit includes:

UniFi Access Door Hub (UA-Hub-Door): This smart hub features 5 x 10/100/1000 Base-T Ethernet ports with PoE++ power available. The maximum power consumption is 30W without PoE output and 50W with PoE output.

Access Reader G2 (UA-G2): The Access Reader G2 is IP55 weatherproof, and uses a single 10/100 MbE RJ45 port for networking. The reader includes a proximity sensor, an 8 ohm, 0.7W speaker, and supports NFC technology.

UniFi Access Cards (UA-Card): These cards have dimensions of 85.6 x 53.98 x 0.84 mm. They comply with ISO 7810 ID-1 format and use NFC technology operating at a frequency of 13.56 MHz, including MIFARE DESFire and UniFi Access Proprietary Security Protocol.

Dimensions174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3")
Weight363 g (12.8 oz)
Enclosure materialPolycarbonate
Mounting materialPolycarbonate
Networking interface(5) 10/100/1000 Base-T

Power methodPoE++
UL 294 Power-limited Class 2 PSU
UL 60950/62368 LPS/PS2 PSU
Max. power consumptionWithout PoE output: 30W
With PoE output: 50W
PoE input50V DC, 1A
PoE outputPoE passthrough, (4) PoE, 50V DC, total 20W
Button(1) Factory-reset
LEDsSystem: white/blue
Output relays: white
Digital inputRequest to exit/request to enter/remote release/door position sensor
Dry output relayLock: 30V DC, 1A
Aux: 30V DC, 1A
Powered output relayLock: 12V DC, 1A
Aux: 12V DC, 0.33A
12V DC, 0.33A
Operating environmentIndoor use only
Operating temperature0 to 40° C (32 to 104° F) 
Operating humidity5 to 95% noncondensing
UL 294 levelDestructive attack: Level I
Line security:  Level I
Endurance: Level I
Standby power: Level I
UL 294 statementCompliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 GradeGrade assignment: 1
CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision levelUA-Hub-Door002, V01
Wiring Information
Typical installation (Shielded)
DC power inputBelden 8750 18 AWG 2 conductor (30.5 m/100 ft)
Door position switchBelden 8750 18 AWG 2 conductor (152.5 m/500 ft)
Request to exitBelden 8750 18 AWG 2 (152.5 m/500 ft)
Wiring gauge requirements (AWG)
Total length to deviceOutput load current at 12V DC
6.1 m (20 ft)22222218
15.2 m (50 ft)22222218
30.5 m (100 ft)22221818
PoE cabling requirementsThe minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm2) for horizontal or riser cable.
PoE inSteady blue: Adopted/device is ready
Steady white: Pending adoption
Blinking white/blue: Upgrading firmware
PoE outOff: Not connected or no data link
Steady blue: Connected and data link on
Dimensions93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
Weight82 g (2.9 oz)
Enclosure materialPolycarbonate, glass
MountingIn wall, gang box
Networking interface(1) 10/100 MbE RJ45 port
ConnectivityBLE 4.1
Power methodPoE
Supported voltage range48V DC
Max. power consumption5W
ESD/EMP protectionAir: ±15kV, contact: ±8kV
SensorsProximity sensor
Speaker(1) 8 ohm, 0.7W
Button(1) Factory-reset
NFC frequency13.56 MHz
NFC read range< 30 mm
NFC standardsISO 14443A, 14443B, 15693
NFC technologyNFC Tag 1,2,3,4,5
MIFARE Classic
MIFARE Ultralight
Operating temperature-30 to 45° C (-22 to 113° F)
Operating humidity5 to 90% noncondensing
CertificationsCE, FCC, IC
Dimensions85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03")
Weight5 g (0.18 oz)
FormatISO 7810 ID-1
NFC frequency13.56 MHz
NFC technologyISO/IEC 14443 Type A
UniFi Access Proprietary Security Protocol

Box Contents:

  • 1 x UniFi Access Door Hub
  • 1 x Access Reader G2
  • 10 x UniFi Access Cards
There are no reviews for this product yet.

Please note that links to other websites are beyond our control. We link in good faith and are not be responsible for their content.

UniFi Access UA-G2-SK Installation

Frequently Purchased Together

LinITX Blog

Copyright © 2002-2024 Multithread Consultants Ltd.