£ GBP
€ EUR
$ USD
LigoWave Outdoor Wireless PtP Bridge 700Mbps - RapidFire 5-23
LigoWave LIGO-PTP-RAPIDFIRE
| Quantity | 1+ | 10+ | 20+ | 50+ | 100+ | 250+ |
| Price | £474.99 EXC VAT | £470.24 EXC VAT | £465.49 EXC VAT | £458.37 EXC VAT | £451.24 EXC VAT | Call Us 01449 888000 |
||||LigoWave Outdoor Wireless PtP Bridge 700Mbps - RapidFire 5-23
The RapidFire 5-23 delivers a high 700Mbps throughput thanks to its unique and powerful RF design that supports up to 256-QAM modulation and 31dBi output power. LigoWave's proprietary W-Jet V protocol, engineered for high performing Point-To-Point (PTP) scenarios, minimises interference even across longer distance links and stabilises latency to within 2-4 ms.
In addition to performance, LigoWave also focuses on delivering flexibility and usability in the RapidFire series. The robust mounting bracket enables rapid deployment of the links and ensures stability during high wind speeds. The integrated antenna features a 45 degree rotation option which increases installation flexibility and isolation, advantageous in noisy spectrum areas. A GORE membrane vent allows fast pressure equalisation of the IP-67 rated cast aluminium enclosure to prevent condensation and to ensure seal performance. Newly featured RGB LEDs indicate different device statuses and signal levels (in 1dBm steps) when aligning the antenna.
2.4 GHz radio- An internal 2.4GHz radio provides access to the RapidFire GUI via wireless with any WIFI equipped device.
Carrier grade surge protection- Integrated surge and ESD protection according to IEC standards and Class 4 requirements.
2nd ETH port with PoE out- Two Gigabit Ethernet ports, one featuring PoE passthrough. The unit is ideal as a repeater link and for IP CCTV installations.
Antenna tilt option- The integrated antenna includes a 45 Degree rotation option which increases installation flexibility in noisy spectrum areas.
Setup Wizard- Guides you through the important steps of the set-up process.
Single side configuration- Link settings can be automatically applied to remote units once set on the master unit.
You can find the RapidFire 5-23 datasheet here.
| Radio | |
|---|---|
| Wireless protocol | W-Jet V |
| Radio mode | MIMO 2×2 |
| Frequency range | 4.900 - 6.100GHz (FCC: 4.940 - 4.990GHz, 5.150-5.250GHz, 5.725-5.850GHz) |
| Channel size | 5, 10, 20, 40, 80MHz |
| Duplexing scheme | TDD |
| Automatic Channel Selection | DFS Compatability |
| Antenna | |
| LigoPTP 5-23 RapidFire | Integrated directional dual-pol 23dBi panel |
| Wired | |
| First Interface | 10/100/1000 Base-T with PoE IN (RJ45) |
| Second Interface | 10/100/1000 Base-T with PoE OUT (RJ45) |
| Physical | |
| Dimensions without mount: | Length 379mm, width 387mm, height 51mm |
| Mount length till pole | 124mm |
| Weight including mount: | 3.9kg |
| Power | |
| Power input method, voltage | PoE 802.3at, isolated 42 - 57VDC |
| Power consumption (max) | 8.6W |
| Power output method, voltage | PoE 802.3af, 48VDC, 12.95W maximum |
| Environmental | |
| Operating temperature | -40C ~ +65C |
| Humidity | 0 ~ 95 % (non-condensing) |
| Regulatory | |
| Certification | FCC/IC/CE |
| Antenna specifications | |
| Frequency range | 4.9 - 5.9GHz |
| Gain | 23dBi |
| Polarisation | Dual linear |
| Cross-pol Isolation | 27dBi |
| VSWR | 1.5:1 |
| Azimuth beamwidth (H pol) | 6 Degrees |
| Azimuth beamwidth (V pol) | 7 Degrees |
| Elevation beamwidth | 9 Degrees |
- 1x RapidFire 5-23
- 1x Mounting Bracket (3 Piece) (screws Included)
- AC/DC Power Adaptor
- 802.3af PoE Injector
Please note that links to other websites are beyond our control. We link in good faith and are not be responsible for their content.
LigoWave RapidFire 5-23 Datasheet
