LinITX APU2 C4 Network 4GB + 16GB SSD pfSense Pre-Configured Kit - Black Enclosure - (3NIC+USB+RTC)

LinITX APU2 C4 Network Firewall + 4GB + 16GB M-SATA SSD - pfSense Pre-Configured Kit (Black Enclosure)

LinITX APU C4 4GB (3NIC+USB+RTC) + 16 GB SSD (pre-installed) with pfSense is a custom built small form factor pfSense firewall.

Please note, the case colour for this particular unit is in BLACK (as shown in 1 of the pictures) and is already pre-installed with a 16GB M-SATA MLC Phison SSD.

The price displayed is for the pre-configured APU2 C4 Kit, the price will update with your PSU options once added to shopping cart.

Note - The latest full version of pfSense will be installed.

Please note, all pfSense kits are built to order and are not always eligible for same day dispatch.

Specifications:

• CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
• DRAM: 4 GB DDR3-1333 DRAM
• Storage: external USB or m-SATA SSD. 1 SATA + power connector.
• Power: 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
• Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
• Connectivity: 3 Gigabit Ethernet channels (Intel i211AT on apu2C2, i210AT on apu2C4)
• Firmware: CoreBoot open source system BIOS with support for iPXE and USB boot.
• Form factor: 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e
• Cooling: Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included).

• 1x PFSense Pre-Configured kit
• Does not include PSU