Sequoia Mike 3A GPS Antenna 3M Cable RA MMCX Male Connector - MIKE3A-MMCXM
Sequoia MIKE3A-MMCXM
||||Sequoia Mike 3A GPS Antenna 3M Cable RA MMCX Male Connector - MIKE3A-MMCXM
The Mike 3A is a compact Dual Mount GPS antenna, tuned to 1575.42MHz. Its small footprint of 47 x 35mm allows this antenna to fit onto most surfaces comfortably, and with a modest height of 17mm, it provides an unobtrusive profile.
Dual mounting: with its magnetic base and separate adhesive pad, the Mike 3A can be mounted onto a range of surfaces. The Mike 3As IP67 rating makes it well suited as an outdoor GPS antenna that can be used for many different GPS applications including: vehicle/fleet/asset tracking and mobile applications, amongst many other general positioning applications.
The Mike 3A has a centre frequency of 1575.42MHz for GPS compatibility. The built in Low Noise Amplifier (LNA) provides a 28dB gain that makes this a high performance antenna, necessary for strong signal reception from visible satellites, as well as a shorter time to obtain them.
Specifications:
10MHz
| Temperature range: | -40 to 85C | |
| Impedance: | 50 ohm | |
| Gain: | 28dB | |
| VSWR: | 2.0 max | |
| Voltage and supply current: | 3.0 - 5.0V / 8923mA | |
| Centre frequency: | 1575.42MHz | |
| Polarization: | RHCP | |
| Amplifier: | 2 stage LNA with SAW filter for out of band attentuation | |
| Noise figure: | 1.4dB typical | |
| Axial ratio: | 1.0dB typical |
Key Specifications - Mechanical
| Dimensions: | 47 x 35 x 17mm (without cable) |
| Cable: | RG174 3M |
| Connector: | MMCX |
| IP rating: | IP67 |
| Mounting method: | Magnetic |

£ GBP
€ EUR
$ USD






