Turris MOX F USB Module
|£57.99 EXC VAT
|£57.41 EXC VAT
|£56.83 EXC VAT
|£55.96 EXC VAT
|£55.09 EXC VAT
|Call Us 01449 888000
The MOX F USB Module allows you to add additional hardware to your MOX configuration. It contains USB 3.0 ports with transfer speeds of up to 5 Gbps that you can use to connect external devices such as drives, TV tuners and more.
When using a MOX F, you can use this module to power a MOX set. It is possible to power the set without using the power supply from MOX A Module. Additionally, it is also possible to use both of the power supplies from the MOX A and F at the same time.
The recommended average load of the USB ports on the MOX F while all ports are in use and using the internal power supply of the MOX F is 800mA per port. This limit is more than enough for most use cases. Additional cooling can help increase this limit. Using solely the MOX A PSU significantly decreases the load limit of USB ports.
You can only use one MOX F module within the configuration; the PCIe bus is terminated there. For this reason, the MOX F cannot be combined with the MOX B. This module can be used only as an extension in a set. You will need at least a MOX Start. If you’re combining it with other modules, make sure they are compatible. You can verify the order of modules and pass-through of PCIe and SGMII signals in the configurator.
|MOX F Specification
|USB 3.0 ports
|12 V ± 5 % / 5 A
|64 pin female connector
|64 pin male connector for connection additional modules
|110 mm × 58 mm × 19 mm (without case)
|Ambient operating temperature
|0 °C to 40 °C (40 °F to 104 °F)
|10% to 90% RH, Non-condensing
- 1x MOX F USB Module