Ubiquiti airMAX M2 NanoStation Loco - LOCOM2

NanoStation M2 Loco is a compact outdoor unit including 2x 8dBi antennas (MIMO) for 2,4GHz band. Unit has real data throughput up to 150Mbps.

For high speed transmission unit uses standard 802.11n and time multiplex TDMA for connecting multiple clients in AP mode.

Download NanoStation M Datasheet

Web-based configuration is very simple and clear. Settings include:

• AP mode, client or WDS
• Traffic shaping
• QoS
• Between WAN and LAN routing and transparent bridge with or without NAT
• Signal strength, which is reported by the onboard LED indicator
• Output power up to 23 dBm
• In bridge mode and WDS device supports transparent transmission IPv6.

  Included is a 24 V PoE power source, which includes a reset button putting device into firmware recovery TFTP mode. In additional unit supports PoE at second UTP port for direct power supply of second device. This feature can be software disabled.

  Specifications:

  • TX Power regulation: yes
  • Comformity: FCC, CE
  • Default IP: 192.168.1.20
  • Default name: ubnt
  • Default password: ubnt
  • DHCP: yes
  • Dimension: 163 x 31 x 80 mm
  • Encryption: WEP, WPA, WPA2
  • Frequence: 2400 - 2486 MHz
  • Gain: 8 dBi
  • Chipset: Atheros
  • Interface : LAN, WiFI
  • LAN port: 1x RJ45 10/100 Mbps
  • Max. output power: 23 dBm
  • Modulation: OFDM, DBPSK, DQPSK, CCK, 64QAM,16QAM
  • NAND: 8 MB
  • Operation mode : AP, Client, WDS
  • Operational temperature: -30~80C
  • OS: AirOS V
  • Polarization: Horizontal and Vertical
  • Power supply: 24 V, 0,5 A
  • Procesor: MIPS 24KC, 400 MHz
  • RAM: 32 MB
  • Sensitivity: -96 dBm
  • Standards: 802.11b/g/n
  • SWR: < 1,4
  • Transmission speed: 300 Mbps
  • Weight: 0,18 kg

See our Blog Entry here for more Setup details