Ubiquiti airMAX Loco M2 NanoStation - LOCOM2

Ubiquiti LOCOM2 airMAX M2 NanoStation

NanoStation M2 Loco is a small form factor outdoor unit, for the 2,4GHz band there are 2 x 8dBi antennas (MIMO) included. The Loco M2 has a data throughput of up to 150Mbps.

The Ubiquiti LocoM2 uses time multiplex TDMA for connecting multiple clients in AP mode and standard 802.11n.

The airMAX M2 can be configured via a simple web-based interface:

Web Based Settings include:

• AP mode, client or WDS
• Traffic shaping
• QoS
• Transparent bridge with or without NAT between WAN and LAN routing and 
• Onboard LED indicator reports signal strength
• Up to 23 dBm output power
• WDS device supports transparent transmission IPv6 in bridge mode

The LOCOM2 includes a reset button putting device into firmware recovery TFTP mode via the 24 V PoE power source.

The Loco M2 supports PoE on the 2nd UTP port for direct power supply of a 2nd device.

See our blog post here for more Loco M2 setup details.

Specifications:

• TX Power regulation: yes
• Comformity: FCC, CE
• Default IP: 192.168.1.20
• Default name: ubnt
• Default password: ubnt
• DHCP: yes
• Dimension: 163 x 31 x 80 mm
• Encryption: WEP, WPA, WPA2
• Frequence: 2400 - 2486 MHz
• Gain: 8 dBi
• Chipset: Atheros
• Interface : LAN, WiFI
• LAN port: 1x RJ45 10/100 Mbps
• Max. output power: 23 dBm
• Modulation: OFDM, DBPSK, DQPSK, CCK, 64QAM,16QAM
• NAND: 8 MB
• Operation mode : AP, Client, WDS
• Operational temperature: -30~80C
• OS: AirOS V
• Polarization: Horizontal and Vertical
• Power supply: 24 V, 0,5 A
• Procesor: MIPS 24KC, 400 MHz
• RAM: 32 MB
• Sensitivity: -96 dBm
• Standards: 802.11b/g/n
• SWR: < 1,4
• Transmission speed: 300 Mbps
• Weight: 0,18 kg

• NanoStation​ LOCO M2
• Zip Tie
• PoE (24V, 0.5A) with Mounting Bracket
• UK Power Cord