£ GBP
€ EUR
$ USD
Ubiquiti UniFi Access G3 Reader (Black) - UA-G3-B
Ubiquiti UA-G3-B
£132.00
Availability:Awaiting Date from Manufacturer
Linitx Quick Code # 18161
Manufacturer SKU: UA-G3-B
Manufacturer: Ubiquiti Inc
Categories:
| Quantity | 1+ | 10+ | 20+ | 50+ | 100+ | 250+ |
| Price | £110.00 EXC VAT | £108.90 EXC VAT | £107.80 EXC VAT | £106.15 EXC VAT | £104.50 EXC VAT | Call Us 01449 888000 |
||||UniFi Access G3 Reader (Black) - UA-G3-B
| Mechanical Specifications | ||
|---|---|---|
| Dimensions | 93 x 40 x 36.5 mm | |
| Weight | 82g | |
| Enclosure material | Polycarbonate, glass | |
| Mounting material |
| |
| Mounting | In wall, gang box | |
| Weatherproofing | IP55 | |
| Hardware Specifications | ||
| Networking interface | (1) 10/100 MbE RJ45 port | |
| Connectivity | BLE 4.1 NFC | |
| Power method | PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU | |
| Supported voltage range | 48V DC | |
| Max. power consumption |
| |
| ESD/EMP protection | Air: ±15kV, contact: ±8kV | |
| Sensors |
| |
| Speaker | (1) 8 ohm, 0.7W | |
| LEDs | R/G/B/W | |
| Button | Factory reset | |
| NFC frequency | 13.56 MHz | |
| NFC read range | < 30 mm | |
| NFC technology |
| |
| Operating environment | Outdoor use | |
| Ambient operating temperature | -30 to 45° C | |
| Ambient operating humidity | 5 to 90% noncondensing | |
| Software information |
| |
| UL 294 level | Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I | |
| UL 294 statement | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. | |
| PoE cabling requirements | Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. | |
| CAN/ULC-60839-11-1 Grade |
| |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 | |
There is no box content detail for this product yet.
Please note that links to other websites are beyond our control. We link in good faith and are not be responsible for their content.
UniFi Access G3 Reader Installation Guide
