Teltonika CAT6 LTE Industrial Cellular Router - RUT360
Teltonika RUT360000200
£191.99
Availability:DISCONTINUED
Linitx Quick Code # 16861
 
Manufacturer SKU: RUT360000200
EAN: 4779027312804
Manufacturer: Teltonika Networks
This product is "End Of Life"
 ||||
||||Teltonika CAT6 LTE Industrial Cellular Router - RUT360
The RUT360 is Teltonika's updated version of their best selling RUT240 which offers internet connection through either Cellular, Wi-Fi or Wired networks.
Equipped with two ethernet interfaces, 802.11 b/g/n WiFi and a CAT6 4G LTE module that supports carrier aggregation, the RUT360 is an ideal device when looking at IoT and M2M application where a secure and reliable connection are essential.
Features:
- Cellular speeds up to 300Mbps with Carrier Aggregation
- 802.11 b/g/n
- Small size - easy integration anywhere
- Rugged aluminium housing
- Firewall and numerous VPN services, including OpenVPN, IPsec, PPTP, L2TP & SSTP
- Compatible with Teltonika Remote Management System
| RUT360 | |
|---|---|
| MOBILE | |
| Mobile module | 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps | 
| Status | Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID | 
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply | 
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages | 
| Black/Whiles list (planned) | Operator black/white list | 
| Multiple PDN | Possibility to use different PDNs for multiple network access and services | 
| Band management | Band lock, Used band status display | 
| APN | Auto APN | 
| Bridge mode | Direct connection (bridge) between mobile ISP and device on LAN | 
| WIRELESS | |
| Wireless mode | 802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA) | 
| WiFi security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation | 
| ESSID | ESSID stealth mode | 
| Wireless Hotspot | Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden | 
| ETHERNET | |
| WAN | 1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover | 
| LAN | 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover | 
| NETWORK | |
| Routing | Static routes, Dynamic routes | 
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL) | 
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets | 
| Connection monitoring | Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection | 
| Firewall | Port forwards, traffic rules, NAT rules, custom rules | 
| DHCP | Static and dynamic IP allocation, DHCP Relay, Relayd | 
| QoS / Smart Queue Management (SQM) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e | 
| DDNS | Supported >25 service providers, others can be configured manually | 
| Network backup | Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover | 
| Load balancing | Balance Internet traffic over multiple WAN connections | 
| SSHFS | Possibility to mount remote file system via SSH protocol | 
| SECURITY | |
| Authentication | Pre-shared key, digital certificates, X.509 certificates | 
| Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T | 
| Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) | 
| VLAN | Tag based VLAN separation | 
| Mobile quota control | Custom data limits for both SIM cards | 
| WEB filter | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only | 
| Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter | 
| VPN | |
| OpenVPN | Multiple clients and a server can run simultaneously, 12 encryption methods | 
| OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC | 
| IPSec | IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) | 
| GRE | GRE tunnel | 
| PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3 support | 
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code | 
| DMVPN | Method of building scalable IPsec VPNs | 
| SSTP | SSTP client instance support | 
| ZeroTier | ZeroTier VPN client support | 
| WireGuard | WireGuard VPN client and server support | 
| MODBUS TCP SLAVE | |
| ID filtering | Respond to one ID in range [1;255] or any | 
| Allow remote access | Allow access through WAN | 
| Custom registers | Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality | 
| MODBUS TCP MASTER | |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 | 
| Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII | 
| MQTT GATEWAY | |
| Gateway | Allows sending commands and receiving data from Modbus Master trough MQTT broker | 
| DNP3 | |
| Supported modes | TCP Master, DNP3 Outstation | 
| DATA TO SERVER | |
| Protocols | HTTP(S), MQTT, Azure MQTT, Kinesis | 
| MONITORING & MANAGEMENT | |
| WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log | 
| FOTA | Firmware update from server, automatic notification | 
| SSH | SSH (v1, v2) | 
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET | 
| Call | Reboot, Status, Mobile data on/off, Output on/off | 
| MQTT | MQTT Broker, MQTT publisher | 
| SNMP | SNMP (v1, v2, v3), SNMP trap | 
| JSON-RPC | Management API over HTTP/HTTPS | 
| Modbus | Modbus TCP status/control | 
| RMS | Teltonika Remote Management System (RMS) | 
| IoT PLATFORMS | |
| Clouds of things | Allows monitoring of: Device data, Mobile data, Network info, Availability | 
| ThingWorx | Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type | 
| Cumulocity | Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP | 
| Azure IoT Hub | Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server | 
| SYSTEM CHARACTERISTICS | |
| CPU | QCA9531, MIPS 24kc, 650 MHz | 
| RAM | 128 MB, DDR2 | 
| FLASH storage | 16 MB, SPI Flash (optional up to 256 MB) | 
| FIRMWARE / CONFIGURATION | |
| WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup | 
| FOTA | Update FW/configuration from server | 
| RMS | Update FW/configuration for multiple devices at once | 
| Keep settings | Update FW without losing current configuration | 
| INPUT/OUTPUT | |
| Configurable I/O | 2 x Configurable digital Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA | 
| Events | SMS, Email, RMS | 
| I/O juggler | Allows to set certain I/O conditions to initiate event | 
| POWER | |
| Connector | 4 pin industrial DC power socket | 
| Input voltage range | 9 - 30 VDC, reverse polarity protection, voltage surge/transient protection | 
| Power consumption | 10.5 W max | 
| PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) | |
| Ethernet | 2 x RJ45 ports, 10/100 Mbps | 
| I/Os | 2 x Configurable digital Inputs/Outputs on 4 pin power connector | 
| Status LEDs | 2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power | 
| SIM | 1 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders | 
| Antenna | 2 x SMA for LTE, 2 x RP-SMA for WiFi | 
| Power | 1 x 4 pin DC connector | 
| Reset | Reboot/User default reset/Factory reset button | 
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminium housing with DIN rail mounting option | 
| Dimensions (W x H x D) | 100 x 30 x 85 mm | 
| Weight | 247 g | 
| Mounting options | DIN rail, flat surface placement | 
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 to 75 C | 
| Operating humidity | 10 % to 90 % non-condensing | 
Package Contents:
- 1 x RUT360
- 1 x 12W PSU
- 2 x LTE Antennas (Swivel, SMA Male)
- 2 x WiFi Antennas (Swivel, RP-SMA Male)
- 1 x 1.5m Ethernet Cable
- 1 x Sim Adapter Kit
- Quick Start Guide
Please note that links to other websites are beyond our control. We link in good faith and are not be responsible for their content.
RUT360 Datasheet

 £ GBP
 £ GBP € EUR
 € EUR $ USD
 $ USD














