£ GBP
€ EUR
$ USD
Teltonika RUT950 Dual-Sim LTE Router International Version - RUT950V025A0
Teltonika RUT950V025A0
Replaced by RUT951100200£257.99
Availability:DISCONTINUED
Linitx Quick Code # 16120
Manufacturer SKU: RUT950V025A0
EAN: 7703949952685
Manufacturer: Teltonika Networks
This product is "End Of Life"
||||RUT950 Teltonika Dual-Sim LTE Router
The Teltonika RUT950 Dual-Sim LTE Router is an extremely reliable and secure LTE router designed for the professional and industrial market. The RUT950 delivers robust high performance for mission-critical cellular communication to remote sites and more.
The Teltonika RUT950 provides peace of mind with seamless connectivity redundancy through Dual-SIM failover. Every job is unique so the external antenna connectors on the RUT950 allow you to attach the most suitable antenna for your application and best optimise the signal in your location.
For customers not needing dual sim support, we also stock a similar LTE router at a lower price point - the Teltonika RUT240 LTE Router, please see our product page for more information.
| MOBILE | |
|---|---|
| Mobile module | 4G (LTE) - Cat 4 up to 150 Mbps, 3G - Up to 42 Mbps, 2G - Up to 236.8 kbps. |
| SIM switch | 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
| Status | Signal strength, SINR, RSRPO, RSRQ, Bytes sent/received |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| Black/White list | Operator black/white list |
| Multiple PDN (optional) | Possibility to use different PDNs for multiple network access and services |
| WIRELESS | |
| Wireless mode | IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
| WiFi | WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter |
| WiFi security | WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation |
| SSID | SSID stealth mode and access control based on MAC address |
| WiFi users | Up to 100 simultaneous connections |
| Hotspot | Captive portal (Hotspot), internal/external Radius server , built in customizable landing page |
| ETHERNET | |
| WAN | 1 x WAN (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| LAN | 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| NETWORK | |
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT |
| Connection monitoring | Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules |
| DHCP | Static and dynamic IP alocation |
| QoS | Traffic priority quening by source/destination, service, protocol or port |
| DDNS | Supported >25 service providers, others can be configured manually |
| Network backup | VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup |
| Load balancing | Balance your internet traffic over multiple WAN connections |
| NetSnapper (optional) | Mobile connection management, data compression VPN client (not available in standard FW) |
| SSHFS (optional) | Possibility to mount remote file system via SSH protocol (not available in standard FW) |
| SYSTEM CHARACTERISTICS | |
| CPU | Atheros Wasp, MIPS 74Kc, 550MHz |
| RAM | 128MB, DDR2 |
| FLASH memory | 16MB SPI Flash |
| POWER | |
| Connector | 4 pin industrial DC power socket |
| Input voltage range | 9 – 30 VDC (4 pin industrial socket), reverse polarity protection; surge protection >31VDC 10us max. |
| PoE (passive) | Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards |
| Power consumption | < 2W idle, < 7W Max. |
| PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) | |
| Ethernet | 4 x RJ45 ports, 10/100 Mbps |
| Status LEDs | 1 x bi-color connection status LED, 5x connection strength LEDs, 4x LAN status LEDs, 1x Power LED |
| SIM | 2 x SIM slots (Mini SIM -2FF, 2st form factor), 1.8V/3V |
| Power | 4 pin industrial DC power socket |
| Anntenas | 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors |
| Reset | Reset/restore to default button |
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminium housing, plastic panels |
| Dimensions | 80 mm x 106 mm x 46 mm (H x W x D) |
| Weight | 235g |
| Mounting options | DIN rail (can be mounted on two sides), flat surface placement |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 C to 75 C |
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
| MTBF | 270000 h |
- 1x RUT950V025A0
- 1x CAT5E UTP Patch Cord 1.5M
- 1x 9V 1A 4-pin PSU
- 1x SIM Adaptor Kit
- 2x WiFi Antenna
- 2x Mobile Antenna
- 1x Quick Start Guide
- 1x RMS sheet
