£ GBP
€ EUR
$ USD
Teltonika RUT951 Dual Sim Industrial 4G LTE Cellular Router - RUT951
Teltonika RUT951100200
£208.79
Availability: Despatched next working day
Linitx Quick Code # 16957
Manufacturer SKU: RUT951100200
EAN: 4779051840168
Manufacturer: Teltonika Networks
||||Teltonika RUT951 Industrial Dual Sim 4G LTE Router
The Teltonika RUT951 is an industrial 4G LTE cellular router that features dual SIM connectivity with 4 Ethernet interfaces and Wi-Fi to meet the needs of a variety of IoT solutions, with automatic WAN failover to an available backup connection ensuring network continuity and reducing the risk of downtime.
Powered by RutOS and compatible with Teltonika's Remote Management System (RMS), the RUT951 is ideal for use in a number of professional installations.
RUT950 - RUT951 key difference
The RUT950 has taken all of the best features of their most popular model (the RUT950) with the difference in the two units laying inside the unit, with the QualComm Chip being replaced by one from MediaTek to try and avoid any disturbances in the global supply chain caused by the chipset and semiconductor shortage seen in recent times.
Features:
Connectivity - CAT4 4G/LTE, 3G, 2G
WAN Failover - Automatic switch to available backup connection
WiFi - Wireless Access Point with Hotspot functionality
Dual SIM - 2 x SIM slots with auto failover, backup WAN and other switching scenarios
Ethernet - >4 x Ethernet interfaces with VLAN functionality
RMS - Compatible with Teltonika Remote Management System
| MOBILE | |
|---|---|
| Mobile module | 4G (LTE) - Cat 4 up to 150 Mbps, 3G - Up to 42 Mbps, 2G - Up to 236.8 kbps. |
| SIM switch | 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, Bytes sent/received, Connected Band, IMSI, ICCID |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| Black/White list | Operator black/white list |
| Multiple PDN (optional) | Possibility to use different PDNs for multiple network access and services |
| WIRELESS | |
| Wireless mode | IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
| WiFi | WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter |
| WiFi security | WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation |
| SSID | SSID stealth mode and access control based on MAC address |
| WiFi users | Up to 100 simultaneous connections |
| Hotspot | Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
| ETHERNET | |
| WAN | 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| LAN | 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| NETWORK | |
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP) |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL) |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules |
| DHCP | Static and dynamic IP allocation, DHCP Relay, Relayd |
| QoS / Smart Queue Management (SQM) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS | Supported >25 service providers, others can be configured manually |
| Network backup | VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover |
| Load balancing | Balance your internet traffic over multiple WAN connections |
| SSHFS (optional) | Possibility to mount remote file system via SSH protocol (not available in standard FW) |
| SYSTEM CHARACTERISTICS | |
| CPU | Mediatek MIPS 24Kc 580 MHz |
| RAM | 128MB, DDR2 |
| FLASH memory | 16MB SPI Flash |
| POWER | |
| Connector | 4 pin industrial DC power socket |
| Input voltage range | 9 - 30 VDC, reverse polarity protection; surge protection >31VDC 10us max. |
| PoE (passive) | Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at and 802.3bt standards |
| Power consumption | < 2W idle, < 7W Max. |
| PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) | |
| Ethernet | 4 x RJ45 ports, 10/100 Mbps |
| Status LEDs | 1 x bi-colour connection status LED, 5x connection strength LEDs, 4x LAN status LEDs, 1x Power LED |
| SIM | 2 x SIM slots (Mini SIM -2FF, 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional) |
| Power | 1 x 4 pin power connector |
| Anntenas | 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors |
| Reset | Reboot/User default reset/Factory reset button |
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminium housing, plastic panels |
| Dimensions | 110 x 50 x 100 mm (H x W x D) |
| Weight | 287g |
| Mounting options | DIN rail (can be mounted on two sides), flat surface placement |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 C to 75 C |
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
Package Contents:
- 1 x RUT951 Router
- 1 x 9W PSU
- 2 x LTE antennas (Swivel, SMA male)
- 2 x WiFi antennas (Swivel, RP-SMA male)
- 1 x 1.5m Ethernet Cable
- 1 x SIM Adapter Kit
- 1 x Quick Start Guide
Please note that links to other websites are beyond our control. We link in good faith and are not be responsible for their content.
Teltonika RUT951 quick start guide
